top of page
ornamental iron fence

ACCESSORIES FOR ORNAMENTAL IRON FENCES

Duraguard Fence Ltd. is a trusted manufacturer and supplier of fencing products in Edmonton and throughout Alberta. We strive to provide you with quality fencing products, suitable for a variety of applications. Our sales and services team is always ready to discuss your exact requirements for custom-made fences. Please browse our catalogue of tools and contact us for more information or to request a quote.

2" Square Post - 16 Gauge

Pyramid Cap Included


Description | Qty | Weight Ea.

5'9" | 88 | 9.20

6'9" | 88 | 10.80

7'9" | 88 | 12.30

8'9 | 88 | 14.00

2 1/2" Square Post - 16 Gauge

Pyramid Cap Included


Description | Qty | Weight Ea.

7' | 48 | 15.00

8' | 48 | 17.00

9' | 48 | 20.00

11' (11 Gauge) | 48 | 24.00

3" Square Post - 12 Gauge

Description | Qty | Weight Ea.

10' | 1 | 36.00

4" Square Post - 11 Gauge

Description | Qty

8' | 1 

10' | 1

6" Square Post x .1875" Wall

Description | Qty

10' | 1


NOTE:

When installed in locations subject to freezing temperatures, where posts are grouted into core-drilled holes, a .25" hole must be drilled into the post approximately .5" above the elevation. This allows for proper drainage of groundwater build-up. The drilled hole must be clean & dry prior to applying zinc primer & colour finish. Failure to follow these practices voids the warranty of the fence system.


3/4" Square 18 ga. Pickets (19 per panel - 4" Air-Space)


1 7/16" x 1 1/2" x 91 15/16" L 14ga. Punched steel channel (3 per panel)


Description | Per Lift | Weight Ea.

4' Nominal Height (46" Net) | 40 | 60.00

5' Nominal Height (58" Net) | 40 | 69.00

6' Nominal Height (70" Net) | 40 | 78.00

Square Post Pyramid Caps

Description | Qty | Weight Ea.

2" Pressed Steel | 1 | 0.14

2 1/2" Pressed Steel | 1 | 0.22

Square Post Ball Caps

Description | Qty | Weight Ea.

2" Pressed Steel | 1 | 0.60

Panel Mounting Brackets

Special Order


Handling Cut Ends

"After cutting rails, prepare the surface by removing all metal shavings, moisture, dirt, grease, loose paint particles, etc., from the cut area using steel wool, fine sandpaper or a wire brush.


Shake can of zinc-rich galvanize protective coating, meeting ASTM B-117064 specifications, vigorously for two minutes after the rattle of the agitator ball is heard and intermittently during use. Do not apply when the temperature is below 5° Celsius or if rain is imminent within 6 hours of application.


Apply protective coating to cover the cut edge by holding the can 10-12 inches from the surface, carefully pointing spray towards the cut edge in a steady back and forth motion to avoid drips or runs. Let the material dry between coats. When the galvanized coating is dry, apply a coat of colour-matched touch-up paint over the protective coating. Let the material dry between coats.


*Failure to seal exposed surfaces correctly may cause red rust to form and will void the warranty."


NOTE:

Panels are rackable up to 48" rise over an 8' run (1:2)

Panel Mounting Brackets - Montage Plus

Description | Qty | Weight Ea.

2 1/2" Universal | 1 | 0.45

Comes with #10 x 3/4" self-drilling screws | 1/4" x 1 1/2" carriage bolts | 1/4" flange nuts


2 1/2" Line | 1 | 0.64

Comes with #10 x 3/4" self-drilling screws | 1/4" x 1 1/2" carriage bolts | 1/4" flange nuts

Use as a Boulevard bracket around a 2" post to join two adjacent fence panels in-line


Montage Plus Flat Back | 1 | 0.27

Comes with #14 x 3/4" self-drilling screws | 1/4" x 1 1/2" carriage bolts | 1/4" flange nuts

Use to attach fence panels to walls, wood posts, etc.


Montage Plus Swivel | 1 | 0.2

Comes with #10 x 3/4" self-drilling screws

Finials

Cast Aluminum - Polyester Powder Coated


Description | Qty | Weight Ea.

5/8" Quad Flair | 1 | 0.12

5/8" Triad | 0.14

3/4" Quad Flair | 0.15

Rings

Cast Aluminum - Polyester Powder Coated


#10 Self-Drilling Screws Included


Description | Qty | Weight Ea.

Corona Ring | 1 | 0.45

Fits on face of 5/8" Pickets - 11 Per Panel

4" Double Ring - Montage Plus | 1 | 0.70

Fits on face of 3/4" Pickets - 10 Per Panel

Montage Welded Single Pedestrian Gate Kit

Gate Ends + Hardware


2 x Gate Ends - 1.25" sq.  |  1 x Fork Latch - 2"  |  1 Latch Collar - 1.25"


2 x Post Hinges - Male - 2" Square  |  2 x Frame Hinges - Female - 1.25" sq.


Description | Qty | Weight Ea.

4' High | 1 | 14.00

5' High | 1 | 16.00

6' High | 1 | 18.00

Montage Plus Gate Hardware

Gate Hardware Included


1 3/4" Square 14 ga. Gate Ends | 3/4" Square 18 ga. Pickets


Fits 48" Opening I/I - Custom Sizes Extra


Description

4' High

5' High

6' High

Montage Plus Gate Ends

1 3/4" Square 14 ga. Gate Ends


Description | Qty | Weight Ea.

4' High Ends | 1 | 6.90

5' High Ends | 1 | 8.75

6' High Ends | 1 | 10.50

Post Hinge

Bolts Included


Description | Qty | Weight Ea.

2" Square |1 | 0.65

2 1/2" Square | 1 | 0.69

Frame Hinge

Bolts Included


Description | Qty | Weight Ea.

1 1/4" Square Frame | 1 | 0.55

1 3/4" Square Frame | 1 | 0.60

2 " Square Frame | 1 | 0.68

Plate Pintle

Description | Qty | Weight Ea.

5/8" Pin | 1 | 0.44

Fork Latch

Description | Qty | Weight Ea.

1 1/4" Square | 1 | 0.34

1 3/4" Square | 1 | 0.40

2" Square | 1 | 0.40

2 1/2" Square | 1 | 0.60

3" Square | 1 | 0.61

Fork Latch Collar

Description | Qty | Weight Ea.

1 1/4" Square | 1 | 0.52

1 3/4" Square | 1 | 0.60

2" Square | 1 | 0.60

Flat Back Fork Latch Plate

Description | Qty | Weight Ea.

Flat Back | 1 | 0.32

Post Base Plate

Description | Qty | Weight Ea.

Fits 2" Square Post | 1 | 2.20

Cane Bolt

Note: Use with Two Frame Hinges (Sold Separately)

A459


Description | Qty | Weight Ea.

5/8" x 48" | 1 | 4.00

Estate Gate Hardware

Description | Per Lift

 

4" Adjustable Hardware | 1

Heavy Duty Centre Latch | 1

6" Adjustable Hardware | 1

black ornamental iron fence
call icon

Customize Your Fence with Accessories

Make your gate look beautiful with our ornamental iron fence accessories from us.

bottom of page